Canmaking lines
Complete Can Making Line dia 109mm, higth 113mm max speed 120cpm, composed by:
-Body Maker machine brand Cevolani complete with oven
-Flanger brand FMI nr.6 chucks
-Seamer brand FMI nr.6 chucks for top ring complete with end feeder
-Seamer brand FMI nr.6 chucks for bottom end complete with end feeder
-Palletizer brand ITAL. MEC
Remark: the line is complete with conveyor and elevator
Karges Hammer press transfer for DRD Can dia 83mm and 1/4 club cans
Karges Hammer Transfer Press nr. 2 out equipped with tooling for cans dia 83mm complete with sheet feeding station
Can Making Line Soudronic mod. AFB-215 dia 99mm, composed by:
– Welder brand Soudronic mod. AFB-215 (no gas, nitrogyn ect available)
-
Can diameter: 52mm-105mm
-
Can height: 50mm-350mm
-
Speed (up to): 150 cpm (depends on the diameter and height of the can)
-
Lower arm : dia 65
-
Welding speed: min. 9 m/min – max 35 m/min
– Combined brand Klinghammer mod. DFS-125 flanger operation and seamer operation
-
Can diameter: 50mm-125mm
-
Can height: 70mm-350mm
-
Speed (up to): 100 cpm (depends on the diameter and height of the can)
– Conveyor, magnetic elevator and packing conveyor
– Chiller for water cooling system
Status: The Line is in full mint working condition
Remark: Soudronic welder does have complete change over parts for 73mm diameter.
Can Making Line Soudronic mod.AFB-108 dia 127mm
Can Making Line dia 127mm composed by :
– Welder brand Soudronic mod. AFB 108 (no gas, nitrogyn ect available)
– Combined brand Klinghammer mod. DFS-195 flanger operation and seamer operation
– Conveyor, magnetic elevator and packing conveyor
– Chiller for water cooling system
Status: The Line is in full mint working condition
Complete Line for Rectangular Cans – Ends 3 /5 LT
Complete line for rectangular Ends brand Naroska available nr. 2 tooling :
– 149mmx116mm
– 165mmx103mm
Max Speed: 60 epm
Remark : The line is still in running
Can Making Line Soudronic mod. FBB 5501 R dia 96/99mm
Complete Can Making Line dia 96/99mm Max Speed : 300cpm
– Welding machine brand Soudronic mod. FBB 5501 R
– Powder system brand Frei AG inside
– Roller system for varnish external brand Frei AG
– Electric Oven 9 mt
– Horizontal Necker machine brand FMI 96/99 mm
– Flanging machine brand FMI-MECFOND mod. 1158 nr. 8 chucks
– Beader machine brand FMI nr. 8 chucks
– Seamer machine brand FMI nr. 6 chucks
– Palletizer brand Emmeti
Remark: the lines is complete with Conveyor – belts to connect the whole lin
Status: The line is still in running
Complete Can Making line for cans dia 73 mm
Complete Can Making line for cans dia 73 mm (300gr); Height 61.5 mm; Speed : 300x 2 = 600 cpm
Composed of the following machines:
Nr.1 Double Slitter brand Cevolani mod. CD-52, complete with automatic sheet feeder brand Cevolani
– 1° operation 5 Pairs of knives in widia
– 2° operation 9 Pairs of knives in widia
Nr.1 Blank Stack Transfer System brand Cepak
Nr.1 Canbody Welder brand Soudronic mod. FBB-400
Nr.1 Seam Protection System inside and outside to varnish
Nr.1 Curing System brand FREI mod. PCA-16
Nr.1 Automatic horizontal Parter brand FMI nr. 6 chucks
Nr.1 Flanger brand Iaccarino nr. 8 chucks
Nr.1 Beader brand FMI mod. A-314 nr. 12 chucks
Nr.1 Seamer nr. 2 station to nr. 8 chucks each
Nr.1 Tester brand Basco
Nr.1 Palletizer semi-automatic brand INCOME
Complete with Conveyor – belts to connect the whole line brand BRONZONI
SS Cantech press transfer for DRD Can dia 83mm x H 108,109,111 & 113
nr.1 Transfer press brand SS Cantech nr.3 station for produce tuna can dia 83 x H 108, 109, 111 and 113 speed 60 cpm, complete with semi automatic palletizer and conveyor/elevator
nr. 1 Press for produce the disk brand Shin Sung
nr. 1 End Making Line dia 83 complete with curler and liner brand Shin Sung
nr. 2 Manual single slitter brand Shin Sung for strips
Status: The lines are still running
Remark: The line will be stop in August 2019
Complete Lines for Promotional Rectangular Can
Nr.3 Complete Can Making Lines for Promotion Rectangular Cans
Can Making Line SOUDRONIC mod. SOUCAN 110 DIA 73mm
Can Making Line dia 73mm composed by :
– Welder brand Soudronic mod. Soucan 110 (no gas, nitrogyn ect available)
– Combined brand Klinghammer mod. DFS-125 flanger operation and seamer operation
– Conveyor, magnetic elevator and packing conveyor
– Chiller for water cooling system
Min/Max Speed : 40 – 120cpm
Status: The Line is in full mint working condition
Complete Line for Rectangular Cans – Ends 3 /5 LT
Complete Line for rectangular Cans 3 and 5 LT:
Welder brand Soudronic type M21633A
Expander brand Başbayraktar Makine
Flanchers brand Klinghammer mod. 481
Nr.2 Seamers brand Yaguchi Model. R4-CM for top and bottom ends
Min Height: 200 mm
Max. Height: 360 mm
Speed: 25-35 cpm
Size 5 LT: 151mmX118mmX312mm
Size 3 LT: 165mmX95mmX235mm
151mmX118mmX312mm
Remark: the line is still in running
Can Making Line Soudronic mod. FBB-400 dia 73mm
Can Making Line dia 73mm, Max Speed : 300cpm, Can height 70-109mm, complete of:
– Welding machine brand Soudronic mod. FBB 400
– Powder system brand Frei AG inside
– Roller system for varnish external brand Frei AG
– Electric Oven 9 mt
-Combined brand Cevolani mod. PVR 472 L. two operation : spinflanger nr. 8 chucks and beader nr. 8 chucks
– Seamer machine brand Angelus mod. 80L nr. 8 chucks
– Palletizer brand Ferembal
– Wrapping machine brand Tosa
Remark: the line is Complete with Conveyor – belts to connect the whole line
Status: The line is still in running.
Complete Making Line for drawn cans 1/4 club
Complete production line for 1/4 club drawn cans, max speed 100×2= 200 cpm. The line is composed by:
– Sheet feeder brand OMPI mod. MTF-120
– Scroll Shear brand OMPI mod. CTS-120
– Collector strips system brand CLEVERTECH mod. TS-06
– Automatic Robot loading presses brand CLEVERTECH mod. TS-26
– Double die Press brand BLEMA mod.PKXD-63.3
– Double Air conveyor from Press to Trimming press brand MIIBERICA TPEA – 2004
– Double Trimming Press brand MIIBERICA mod. PAP200F2
– Double conveyor from trimming press to palletizer brand MIIBERICA mod. M-02-04-0640
– Automatic palletizer brand CLEVERTECH mod. PM-120
– Automatic Wrapping brand ESTEMPAL
Status: The Line is in fully working conditions and can be inspected.
Used TWO Complete Making Lines for Cans dia 73 mm
1)Used Complete Making Line for Cans dia 73 mm (500gr)max speed 450cpm. Composed of the following machines:
Nr.1 Double Slitter brand Ocsam with automatic sheet feeder and strip feeder, complete with:
– 1° operation 5 Pairs of knives in widia
– 2° operation 9 Pairs of knives in widia
Dia shaft : 100mm
Nr.1 Canbody Welder brand Soudronic mod. FBB-500
Nr.1 Seam Protection System inside brand GS&T
Nr.1 Curing System brand brand GS&T
Nr.1 Spinflanger brand Cevolani mod.BR-460 nr. 12 chucks
Nr.1 Beader brand Cevolani nr. 12 chucks
Nr.1 Seamer nr. 2 station to nr. 8 chucks each brand Tessitore
Nr.1 Tester brand Basco nr. 60 chucks (like new)
Nr.1 Palletizer brand Spaggiari
2)Used Complete Making Line for Cans dia 73 mm (500gr)max speed 500cpm. Composed of the following machines:
Nr.1 Double Slitter brand La Meritermica, with automatic sheet feeder and strip feeder, complete with:
– 1° operation 5 Pairs of knives in widia
– 2° operation 9 Pairs of knives in widia
Nr.1 Canbody Welder brand Soudronic mod. FBB-5501/R
Nr.1 Curing System brand brand GS&T
Nr.1 Spinflanger brand Cevolani mod.BR-460 nr. 12 chucks
Nr.1 Beader brand FMI mod. A-305 nr. 8 chucks
Nr.1 Seamer brand Cuomo Nr. 12 chucks
Nr.1 Tester brand Basco nr. 60 chucks
Nr.1 Palletizer brand Spaggiari
Remark:Both the Cans lines is complete with Conveyor – belts to connect the whole line
Remark:Both the Cans lines are connected by a single powder system inside brand GS&T
Remark:These machines are still mounted and you can see it at any time.